MIL --- PRF --- 51200D
3.3.7.3 Color. The tape's color shall be white, or another light color with sufficient contrast
with the kit's marking ink to ensure legibility.
3.3.8 Marker.
3.3.8.1 Physical attributes. The marker shall consist of a non --- refillable pen, with re --- seal-
able cap, containing an indelible black ink.
3.3.8.2 Legible writing. The type of marker and width of the marking shall enable an opera-
tor who wears Mission Oriented Protective Posture (MOPP) IV gloves and overgloves to pro-
duce a clearly legible writing on the custody seal and labeling tape when testing in accordance
with 4.4.16. The marker shall produce a bold writing on the custody seal and labeling tape in
temperatures ranging from --- 20°F to 120°F after low and high temperature conditioning stor-
age according to 4.4.13 and 4.4.14. Marking shall not smear when touched by a wet finger after
being allowed to dry for not greater than 20 seconds.
3.3.8.3 Easily held. The marker shall be of a size that is easily held without dropping by an
operator who wears MOPP IV gloves and overgloves.
3.3.9 Snips.
3.3.9.1 Ability to cut packaging. The snips shall be capable of cutting packaging materials
when used properly by any operator who wears MOPP IV gloves and overgloves without injury
or damage to the gloves.
3.3.9.2 Ability to cut twigs. The snips shall be capable of cutting samples of vegetation in-
cluding twigs up to 1/4" thick in diameter when tested in accordance with 4.4.9.
3.3.9.3 Physical attributes. The snips shall have blunt tips with dull finish blades.
3.3.10 Wipes.
3.3.10.1 Absorption capacity. Each wipe shall consist of a lint --- free cloth wipe capable of
absorbing a minimum of 10 milliliters (0.33 ounce) of water in a single operation.
3.3.10.2 Size. The wipe shall be at least 4 inch by 4 inch in size and shall easily fit into one
of the kit's sample containers.
3.3.10.3 Absence of dyes. The wipes shall not contain any materials, dyes or additives that
could adversely affect the analysis process for chemical warfare agents.
3.3.11 Tweezers (forceps).
3.3.11.1 Ability to hold wipes and materials. An operator wearing MOPP IV gloves and
overgloves shall be capable of securely grasping and holding surface sampling wipes and materi-
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business