MIL --- PRF --- 51200D
3.3.3.5 Shatter resistance. The sample containers shall show no evidence of breakage fol-
lowing 4 foot drop testing described in 4.4.15.
3.3.4 Custody seals.
3.3.4.1 Easy peel off. The seal shall be capable of being peeled off its initial backing when
the user is wearing MOPP IV gloves and overgloves.
3.3.4.2 Adhesion to materials. Each custody seal shall consist of an adhesive --- backed, pres-
sure --- sensitive labeling material capable of adhering to the small bag in 3.3.6.1 and sample con-
tainer in 3.3.3 (see note 6.3). When the custody seal is applied to the small bag in 3.3.6.1, it shall
not be removable by hand without breaking (destroying) part of the seal itself.
3.3.4.3 Physical attributes. The custody seal shall be long enough to go over the container's
cap and sides and adhere to both surfaces. The center --- most portion of the custody seal shall
adhere to the container's cap and each end portion shall adhere to the container's sides. The
width shall be at least one inch to allow space for legible hand --- written identification informa-
tion using the kit's marker. The custody seal shall include the following pre --- printed words as
a minimum for sample identification: "Name", "Sample No.", "Date" and "Time" separated by
underlined blank spaces. The seal may also contain the pre --- printed word "Location".
3.3.4.4 Color. The color shall be white or another light color with sufficient contrast with the
kit's marker to ensure legibility.
3.3.5 M8 Paper. The booklet of M8 Paper, Chemical Agent Detector, NSN
6665 --- 00 --- 050 --- 8529 shall be Government furnished.
3.3.6 Bags.
3.3.6.1 Small bags.
3.3.6.1.1 Physical attributes. Each small bag for primary back --- up containment of the sam-
ple containers shall have a self --- closing or self --- sealing mechanism and shall measure no larger
than 8 inches by 12 inches.
3.3.6.1.2 Strength. Each bag shall be capable of passing the load capacity tests described in 4.4.6.
The primary containment bag shall not puncture or tear when a 1.0 pound load is placed inside the bag.
3.3.6.1.3 Leak resistance. Without any external materials other than a single layer of labeling
tape, each bag shall be capable of being sealed by personnel in MOPP IV. Each bag shall prevent
water leakage when tested for leakage in accordance with 4.4.7.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business