INCH-POUND
MIL-PRF-38715B
15 October 1996
SUPERSEDING
MIL-I-38715A(USAF)(1)
20 April 1971
PERFORMANCE SPECIFICATION
INDICATOR, COMBUSTIBLE GAS AND OXYGEN
This specification is approved for use by all Departments and Agencies of the Department of
the Defense.
1. SCOPE
1.1 Scope. This specification covers two types of indicators for measuring combustible gas and
oxygen.
1.2 Classification Indicators covered by this specification shall be of the following types as
.
specified (see 6.2).
Type I - Indicator, combustible gas and oxygen, without calibrator.
Type II - Indicator, combustible gas and oxygen, with calibrator.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be
of use in improving this document should be addressed to: SA-ALC/TILDD, 485 Quentin
Roosevelt Rd. Kelly AFB, TX 78241-6425 by using the Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 6665
DISTRIBUTION STATEMENT A Approved for public release, distribution is unlimited
.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business